Bat Exclusion: How We Get Bats Out and Keep Them Out

November 16, 2026

Bat exclusion setup on a roof that lets bats leave but not return

Out the door, not back in

Bat exclusion lets bats leave on their own, then closes the house behind them.

One-way doors.

Bats fly out at night but can’t get back in.

10 to 14 days.

Typical summer timeline, start to finish.

Sealed when empty.

We seal up only after confirming the bats are gone.

Bat exclusion is the safe, legal way to get bats out of a house. Instead of trapping or killing bats, we install one-way doors at the spots bats use to leave. Bats fly out at night to feed and drink but can’t get back in. Once we confirm the attic is empty, we seal the house so they can’t return.

Bats are the animal our wildlife team removes most often in Kansas City. Here’s how our bat exclusion process works, how long it takes and what affects the timing.

Why is exclusion the right way to remove bats?

Bats are protected wildlife in Kansas and Missouri, and there are no poisons registered for them. Kansas and Missouri wildlife agencies both recommend exclusion as the way to remove bats from buildings.

Exclusion also works better than anything else. Trapping a few bats doesn’t remove a colony, and repellents and ultrasonic devices don’t work, according to University of Missouri Extension. Sealing gaps without exclusion traps bats inside, where they can die in the walls or push into your living space. Read more about whether bats are protected.

Step 1: Inspection

Every bat exclusion starts with an inspection. Our wildlife team checks the whole roofline and attic for:

  • Every gap bats are using to get in and out
  • Every other gap a bat could use once the main exits are closed
  • Signs of how big the colony is and whether pups are present
  • How much guano has built up

Bats can fit through a gap about 1/4 to 1/2 inch wide, so we look closely at fascia, soffits, gable and ridge vents, chimney flashing, siding corners and utility openings. Our crew carries ladders up to 40 feet to reach high rooflines. The inspection is free, and you get a detailed report with photos and a written estimate. See how bats get in the house and what a bat inspection covers.

Step 2: Seal the secondary gaps

On the first visit, we seal every potential entry point except the one or two main entrances the bats use most. If backup gaps stay open, bats simply fly next door to an unused gap and get back in once the main exit is blocked. This step is what makes the rest of the exclusion work.

Step 3: Install one-way doors

Next, we install one-way doors, also called bat cones, over those main entrances. The doors let bats crawl or drop out to fly away at night, but they can’t find their way back in. Each bat leaves on its own schedule, unharmed.

Step 4: Wait for the bats to leave

This is the step that takes patience. In summer, bats leave every night to feed and find water, so most of the colony is out within a few nights. We leave the doors up long enough to be sure every bat has had time to leave. A typical summer bat exclusion takes 10 to 14 days from start to finish. See how long bat removal takes.

Step 5: Confirm and seal

On the final visit, once we confirm the attic is empty, we remove the bat cones, seal the last entrances and, if you’ve added them, treat the attic for ectoparasites like bat mites and sanitize it. Most bat jobs take 2 to 3 visits: 2 if everything goes well, and 3 if we find a missed entry point and need to seal it and reinstall a one-way door. You’ll need to be home for the first and final visits so we can get into the attic. Visits in between are exterior only. We seal only after we know the bats are out, so no bats get trapped inside. Our wildlife team completes bat exclusion with a one-year guarantee. If bats get back in during that year, we’ll remove them again at no charge. If they found a gap we missed, sealing that extra spot may cost extra.

How does the season affect bat exclusion?

Timing is one of the biggest parts of bat exclusion:

  • Spring. If we catch a colony before the pups are born, there’s still time to get the bats out first.
  • Pup season. Once pups are born, they have to be able to fly on their own before they can leave. Depending on what we find in the attic, we may need to wait until they’re flying. Read about bat maternity season.
  • Summer. Bats leave every night, so exclusion usually takes 10 to 14 days.
  • Fall. As the air cools, bats sleep longer and go out less, sometimes only once a week. The same job can take a month or two. Through October or early November, we can still seal up and use bat cones if it’s warm enough for bats to be active.
  • Winter. In the dead of winter, we may start sealing but wait to install the bat cones until spring, when the weather warms up and bats are active again.

See removing bats in winter for more.

What about the guano left behind?

Exclusion gets the bats out, but it doesn’t remove what they left. Guano and urine can build up in the insulation, cause odor and grow the fungus that causes histoplasmosis.

Guano cleanup, sanitizing and odor treatment are available as an add-on. We quote it after we see the attic, since the amount of guano varies a lot from one attic to the next. Heavily soiled insulation can be removed and replaced. Most of the cleanup happens on the first visit, with any final cleanup on the last visit. Ectoparasite treatment for bat mites and a sanitizing treatment are also add-ons, done at the very end once all the bats are out.

How much does bat exclusion cost?

A typical bat removal and exclusion job averages around $950, not including cleanup. The price goes up from there based on how much exclusion work the house needs, like how many gaps need sealing and how high the roofline is. Cleanup, ectoparasite and sanitizing add-ons are quoted separately. Your exact price comes after the inspection. See our bat removal cost guide for more detail.

Have bats? Call 913-735-5451, answered 24/7, or schedule online. Most services can be scheduled same day.

Frequently Asked Questions